Leon Mk1
Rear bonnet lock: removing and installing |
1 - | Bolt |
2 - | Joining rod |
q | Component of rear bonnet activator |
3 - | Washer |
4 - | Lock key |
q | Removing: |
– | Extract the bolts from the handle moulding. |
– | Remove rear bonnet lining → Linings of rear bonnet ; Rep. Gr.70. |
– | Remove the actioning rod → Item and the joining rod of the actioning element of the lock key. |
– | Press the lugs of the inside of the bonnet → Item and extract the lock key from the bonnet, pushing it out. |
5 - | Actioning rod |
6 - | Closing |
7 - | Bolt |
q | Tightening torque: 20 Nm |
8 - | Closing plate |
9 - | Bolt |
q | Tightening torque: 20 Nm |
10 - | Tailgate operator |
|