Leon Mk1
| Cordoba Vario tailgate, general installation overview |
| 1 - | Tailgate |
| q | Adjustment → Chapter |
| q | Tolerances → Dimensions; Rep. Gr.00. |
| q | To remove, it is only necessary to unscrew the hexagonal bolt → Item |
| 2 - | Lining |
| q | Removing and installing → Linings of rear bonnet ; Rep. Gr.70 |
| 3 - | Clip |
| 4 - | Adjustment catches |
| q | Adjustment → Chapter |
| 5 - | Ball joints |
| q | Tightening torque: 21 Nm |
| 6 - | Gas damper |
| q | Removing and installing → Item |
| q | Discharging gas → Chapter |
| 7 - | Lock plate cover |
| 8 - | Closing plate |
| q | Adjustment: within the oversized holes |
| q | Tolerances → Dimensions; Rep. Gr.00. |
| 9 - | Bolt |
| q | Tightening torque 23 Nm |
| 10 - | Hexagonal bolt |
| q | Tightening torque 22 Nm |
| q | To remove the tailgate this hexagonal bolt must be unscrewed |
| 11 - | Hexagonal bolt |
| q | Tightening torque: 10 Nm |
| 12 - | Adapting plate |
| q | Thanks to the adapting plate it is not necessary to adjust the tailgate |
| 13 - | Joint |
| 14 - | Hinge |
| 15 - | Twelve-sided bolt |
| q | Tightening torque: 10 Nm |
| 16 - | Joint |