Leon Mk1
Front wheel housing moulding: removing and fitting |
– | Undo the wheel. Wheel bolt tightening torque. |
t | Tightening torque: 110 Nm |
– | Extract the combined bolt -4-. |
– | Remove the combined bolts -3- from the expansion bolts -2- or the front bumper. |
– | Unscrew hexagon nuts -5-. |
– | Remove the wheel housing shell -1- from the wheel housing. |
Dismounting the air guide piece |
– | Remove the combined bolt -4- if the wheel housing shell is not dismounted. |
– | Remove hexagonal bolts -7- from the bumper. |
– | Disconnect the air guide piece -8- at the front. |