Leon Mk1
Mirrors |
Manually-adjusted rear view mirror |
1 - | Control button |
q | Inserted in the control |
2 - | Cover |
q | Disassemble the door frame at right angles |
q | To do this, press using the lever -T20043- |
3 - | Clip |
4 - | Bolt |
q | Tightening torque: 2 Nm |
5 - | Securing nut |
q | For manual operation of the rear view mirror |
q | Tightening torque: 2 Nm |
6 - | Joint |
7 - | Operation (manual) |
8 - | Mirror glass |
q | Removal: disassemble the mirror, first on the lower part and then on the upper part (lever -T20043-) protecting the housing from possible damage |
q | Fitting: place the mirror with guide pivots in the housings and assemble by pressing |
q | Only exert pressure in the glass centre, using protective gloves in all cases |
9 - | Mirror casing |
10 - | Supplement/mirror foot |
Electrically-adjusted rear view mirror |
1 - | Mirror casing |
2 - | Mirror glass |
q | Removal: disassemble the mirror, first on the lower part and then on the upper part (lever -T20043-) protecting the housing from possible damage |
q | Remove or connect the connectors for the mirror heating |
q | Fitting: place the mirror with guide pivots in the housings and assemble by pressing |
q | Only exert pressure in the glass centre, using protective gloves in all cases |
3 - | Supplement/mirror foot |
4 - | Foam rubber hose |
5 - | Connector |
6 - | Support |
q | For connector |
q | Encased in the door joint |
7 - | Connector |
8 - | Cover |
q | Disassemble the door frame at right angles |
q | To do this, press using the lever -T20043- |
9 - | Clip |
10 - | Bolt |
q | Tightening torque: 2 Nm |