Leon Mk1
| Front wheel housing body: removing and fitting |
Note| The wheel housing bodies differ slightly, depending on the position and the number of elements fitted and on the vehicle equipment |
| 1 - | Wheel housing body |
| q | PP/PE Material |
| q | Dismantling: |
| – | Remove the wheel (Wheel bolt tightening torque= 110 Nm) |
| – | Extract the Torx bolts → Item (13 units) and remove the wheel housing body |
| 2 - | Expanding nut |
| q | Nine units |
| 3 - | Torx bolts T20 |
| q | Thirteen units |
| 4 - | Spring nut |
| q | Four units |
