Leon Mk1
Rear wheel housing body: removing and fitting |
Note
The wheel housing bodies differ slightly, depending on the position and the number of elements fitted and on the vehicle equipment |
1 - | Wheel housing body |
q | PP/PE Material |
q | Dismantling: |
– | Remove the wheel (Wheel bolt tightening torque= 110 Nm) |
– | Extract the Torx bolts → Item (5 units) and remove the wheel housing body |
2 - | Expanding nut |
q | Two units |
3 - | Spring nut |
q | Three units |
4 - | Torx bolt T20 |
q | Five units |