| t
| Used oil collection and extraction unit -V.A.G 1782-, see equivalent → Anchor |
| t
| Ø of the hose: Approx. 18 mm |
| t
| Commercially available compressed-air gun |
Note | Cleaning norms when working on automatic gearbox. → Chapter |
| –
| Before fitting a replacement gearbox, the ATF cooler and ATF pipes must be cleaned using compressed air (not more than 10 bar). |
| –
| Also always renew additional ATF filter before installing replacement gearbox. |
Note | t
| If the ATF which emerges during cleaning is very dirty, the ATF cooler and ATF lines must additionally be flushed out with clean ATF. |
| t
| Removing and installing ATF pipes → Chapter. |
|
|
|
