Leon Mk1
Exploded view - input shaft with 7 friction plates |
1 - | Input shaft oil seal |
q | Replace → Chapter |
2 - | Retaining ring for input shaft cover |
q | Replace with one of same thickness |
3 - | Input shaft cover |
q | After removing cover, renew bearing „A“ (ball bearing for gearbox input shaft) in input shaft cover → Chapter |
4 - | Piston |
q | Wear assessment procedure → Chapter |
5 - | Tightening plate |
q | Wear assessment procedure → Chapter |
6 - | Corrugated washer |
7 - | Upper shim |
q | Determining thickness → Chapter |
q | replace |
8 - | Friction plate |
q | 7 off |
q | replace |
9 - | Outer plate |
q | 6 off |
q | replace |
10 - | Lower shim |
q | Determining thickness → Chapter |
q | replace |
11 - | Input shaft cylinder |
q | Wear assessment procedure → Chapter |
12 - | O ring |
q | replace |
13 - | Oil pipe |
q | Wear assessment procedure → Chapter |