seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Actioning cable: mounting and adjusting > < Heating unit: dismantling and assembling
Control unit for heating and fresh air: dismantling and assembling
   
Control unit for heating and fresh air: dismantling and assembling
  Caution
Before doing any work on the electrical installation, you should disconnect the earth battery strap.
  Note!
Before disconnecting the battery check antitheft coding on the radio.
1 - Trim
2 - Control unit for heating and air conditioning
q   With fresh air blower switch -E9-
3 - Chromatic filtre
4 - Illuminating light for control unit
q   12 V, 1.2 W
q   Removal:
–  Loosen the control unit from the central console → Chapter
–  Unclip lampholder.
–  Extract the lamp.
5 - Keys
6 - Switch
q   For air conditioning -E35-
q   With fresh air flap and air recirculation -E159-
q   With the illuminating lamp -L43- and -L86-
7 - Control knob
q   For dismounting use some pliers with plastic or rubber clamps
8 - Optical conductor
9 - Lampholder

   

Actioning cable: mounting and adjusting > < Heating unit: dismantling and assembling