Leon Mk1
|
1 - | Dowel sleeves |
q | 2 units |
q | Make sure the cylinder head supports are correctly seated. |
2 - | Compressor |
Removing |
– | Remove the hexagon bolts, → Item and → Item. |
– | Remove the compressor from the support and fix it to the body with a suitable tool (e.g. soldering wire) → Fig.. |
q | Poly-V belt routing → Fig. |
Fitting |
t | Before fitting, it is necessary to: |
– | Replace fixing bolts. |
– | Note the order of tightening of the securing bolts. |
– | Tightening torques: tighten the hexagonal bolts -4- and, finally, -3-. |
3 - | Hexagon bolt |
q | 25 Nm |
4 - | Hexagon bolt M8x106 |
q | 25 Nm |
q | 2 units |
5 - | Dowel sleeves |
q | 3 units |
q | Make sure the cylinder head supports are correctly seated. |
Note
|