seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Differential: adjusting > < Differential: Dismantling and assembling

Leon Mk1

Fitting
Fitting
   
–  Fit the new seal to the stop without twisting, using the tool -U-40200/14- and hitting with a plastic mallet.
–  Fill the space remaining between the sealing lips with universal grease.
  E39-0064
–  The safety ring of the outlet shaft must always be replaced.
–  Fix the outlet shaft with protector jaws in a bench vice. Remove the old safety ring from the throat of the outlet shaft and insert a new safety ring -A-.
–  Fit the outlet shaft in the gearbox by hitting with a plastic mallet.
–  Fit the jointed half-shaft to the outlet shaft.
–  Check the level of the gear oil and, if necessary, fill to the lower edge of the filling hole. Specification and quantity needed → Chapter.
  V34-2005

Differential: adjusting > < Differential: Dismantling and assembling