–
| Unscrew the gearbox oil level stopper -arrow-. |
If the oil flows out or is at the level of the filling hole, the level is correct. |
–
| Clean the thread of the stopper and apply sealant or protective material -D 000 600 A2-. |
–
| Screw in the bolt -arrow-. |
To refill the gearbox with new oil: |
–
| Unscrew the stopper -arrow-. |
–
| Add oil until it slops on the lower edge of the filling oil. |
–
| Clean the thread of the stopper and apply sealant or protective material -D 000 600 A2-. |
–
| Screw in the stopper -arrow-. |
|
|
|