| –
| Apply -AMV 188 001 02- on the contact surfaces with the support of the filter, by the outside part of the gasket. |
| –
| Install the cooler on the support and secure it with the nut to a torque of 25 Nm. |
| –
| Once installed, make sure that it has no friction with the other parts of the periphery. |
| –
| Screw on the oil filter and tighten by hand. |
| –
| Install the coolant hoses onto the oil cooler. |
| –
| Check the coolant and oil levels, fill if necessary. |
|
|
|
