Leon Mk1
Components' fitting locations |
1 - | 4-pin connector |
q | For lambda probe |
2 - | Lambda probe -G39-, 55 Nm |
q | Fitting location: in the front exhaust pipe |
3 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
4 - | Throttle valve control unit -J338- |
5 - | Knock sensor 1 -G61- |
q | Removing and installing → Item |
6 - | Ignition transformer -N152- |
q | Removing and installing → Item |
7 - | Fuel rail |
8 - | Earth connection |
9 - | Engine control unit |
q | Control unit for injection and ignition system Marelli 1AV -J382- |
q | Renew → Chapter |
10 - | Fuel pressure regulator |
11 - | Ignition distributor |
q | Removing and installing → Item |
12 - | Central connector |
13 - | Earth connection |
14 - | Coolant temperature sender -G62- |
q | Identification: yellow ring |
15 - | Injectors (-N30-…-N33-) |
16 - | Air filter |
q | Dismantling and assembling → Chapter |
17 - | Spark plug, 25 Nm |
q | Test data → Chapter |
18 - | Oil pressure switch |
19 - | Solenoid valve 1 for activated charcoal filter -N80- |
q | Activated charcoal filter system → Rep. Gr.20 |
20 - | Activated charcoal filter system |
q | In right wheel arch |
q | Activated charcoal filter system → Rep. Gr.20 |