Leon Mk1
Note
|
| 1 - | 20 Nm + 90 ° (1/4 turn) |
| q | Replace |
| 2 - | Rocker axle |
| q | removing and fitting → Chapter |
| 3 - | Counternut |
| 4 - | Slotted bolt |
| q | Replace this when fitting a new injector pump if there are signs of wear |
| q | Grease the contact surface with the injector pump sphere head pin → Parts Catalogue |
| 5 - | Injector pump |
| q | Check if the sphere head pin has traces of wear; replace it if necessary |
| q | Grease the contact surface with the adjustment screw → Parts catalogue |
| q | removing and fitting → Chapter |
| 6 - | O ring |
| q | replace → Chapter |
| 7 - | O ring |
| q | replace → Chapter |
| 8 - | O ring |
| q | replace → Chapter |
| 9 - | Heat proof joint |
| q | Replace |
| 10 - | Circlip |
| 11 - | Cylinder head |
| 12 - | Clamping block |
| 13 - | 12 Nm + 270° (3/4 turn) |
| q | Replace |
