seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removal: > < Removing and installing Hall senderG40

Leon Mk1

Removing, installing and tensioning toothed belts
Removing, installing and tensioning toothed belts
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter
   
Special tools and workshop equipment required
t  2x Locking pin for the diesel injection pump -3359-, see equivalent → Anchor
t  Crankshaft stop -T10050-, see equivalent → Anchor
t  Hose clamp -T10172-, see equivalent → Anchor
t  Special wrench, long reach -T10264-, see equivalent → Anchor
t  Pin -T10265-, see equivalent → Anchor
t  Socket XZN 10 -T10385-, see equivalent → Anchor

Not illustrated
t  Torque wrench -V.A.G 1331-, see equivalent → Anchor.
t  Torque wrench -V.A.G 1332-, see equivalent → Anchor.
   

Removal: > < Removing and installing Hall senderG40