seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing sump > < Removing and installing parts of the lubrication system

Leon Mk1

Removing
Removing
–  Remove the soundproofing sump at the centre, and then at the left and right in the same way → General body repairs; Rep. Gr.50
–  Drain engine oil.
–  Remove sump.
–  Loosen sump with light blows of a rubber headed hammer if necessary.
–  Remove sealant residue on cylinder block with a flat scraper.
   
–  Remove sealant residue on the sump with a rotating brush, e.g. a hand drill with a plastic brush (wear protective glasses).
–  Clean sealing surface, must be free of oil and grease.
  N17-0012

Removing and installing sump > < Removing and installing parts of the lubrication system