Leon Mk1
Components of the coolant system, engine side |
1 - | 15 Nm |
2 - | Coolant pump |
q | Make sure it turns gently |
q | Note the fitting position |
q | Removal and refitting → Chapter |
3 - | O ring |
q | Replace |
4 - | To the upper radiator hose |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
5 - | To the cylinder head |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
6 - | Flexible pipe |
7 - | To the top of the expansion tank |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
8 - | O ring |
q | Check that it seats firmly |
q | Replace |
9 - | Coolant temperature transmitter -G62- |
q | With transmitter for the coolant temperature indicator -G2- |
10 - | Fixing clip |
q | Check that it seats firmly |
11 - | To the heat exchanger |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
12 - | From the heat exchanger |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
13 - | To the bottom of the expansion tank |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
14 - | 10 Nm |
15 - | Rigid connection sleeve |
16 - | Rigid coolant pipe |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
17 - | To the radiator, top |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
18 - | To the radiator, bottom |
q | Connection diagram of the flexible pipes of the coolant → Chapter |
19 - | Connection sleeve |
q | For coolant thermostat |
20 - | Coolant thermostat |
q | Removal and refitting → Chapter |
q | Bear in mind the assembly position → Chapter; Coolant thermostat: removal and refitting |
q | Check: heat the thermostat in water |
q | Opening starts at approx. 85 °C |
q | Ends at approx. 105 °C |
q | Opening run at least 7 mm |
21 - | Oil radiator |
q | Removal and refitting → Item |