Removing and installing parts of cooling system |
Note! t
| When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work. |
t
| Hoses are secured with spring-type clips. In cases of repair only use spring-type clips. |
t
| Pliers -T20029- are recommended when installing spring-type clips. |
Perform cooling system leakage test with cooling system tester -V.A.G 1274- and adapters -V.A.G 1274/3- and -V.A.G 1274/4-. |
Parts of cooling system engine side → Chapter. |
Coolant mixture ratios → Chapter, draining and filling with coolant. |
|
|
|