Leon Mk1
Parts of cooling system body side |
1 - | Radiator |
q | Removing and installing → Chapter |
q | After replacing renew entire coolant |
2 - | Lock carrier |
3 - | Radiator fan |
4 - | 10 Nm |
5 - | Bracket |
q | For electric fan |
6 - | Cable retainer |
7 - | Lower coolant hose |
q | To thermostat in thermostat housing → Item |
q | Coolant hose connection diagram → Chapter |
q | Secured to radiator with retaining clip |
8 - | From heat exchanger |
q | Coolant hose connection diagram → Chapter |
9 - | Connector |
10 - | Upper coolant hose |
q | From connection on cylinder head |
q | Coolant hose connection diagram → Chapter |
q | Secured to radiator with retaining clip |
11 - | Expansion tank |
q | Carry out leak test of cooling system with cooling system tester -V.A.G 1274- and adapter -V.A.G1274/3- |
12 - | O-ring |
q | Renew if damaged |
13 - | Cap |
q | Check with cooling system tester -V.A.G 1274- and adapter -V.A.G 1274/4- |
q | Test pressure 1.4...1.6 bar |
14 - | Cover |
15 - | From cylinder head |
q | → Item |
q | Coolant hose connection diagram → Chapter |
16 - | To coolant pipe |
q | → Item |
q | Coolant hose connection diagram → Chapter |
17 - | Thermo-switch -F18-, 35 Nm |
q | For electric fan |
q | Switching temperatures: 1st speed on: 92...97 °C off: 84...91 °C 2nd speed on: 99...105 °C off: 91...98 °C |