seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Cylinder head gasket identification > < Checking piston projection at TDC

Leon Mk1

Test sequence
Test sequence
   
Piston projection at TDC must be measured when installing new pistons or a short engine. Depending upon piston projection, install the corresponding cylinder head gasket according to following table:
  Note!
Turn engine clockwise to measure piston projection at TDC.
  E13-0050
Piston projectionIdentification
Holes/notches
0.91 mm ... 1.00 mm1
1.01 mm ... 1.10 mm2
1.11 mm ... 1.20 mm3

   

Cylinder head gasket identification > < Checking piston projection at TDC