seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing oil sump > < Removing and installing parts of the lubrication system

Leon Mk1

Removing and installing parts of the lubrication system
Removing and installing parts of the lubrication system
  Note!
t  A self-taping bolt is used, as standard, to secure the dipstick guide tube to the plastic intake manifold. If this bolt is loosened or tightened with a power tool there is a danger of damaging the thread in the intake manifold.
t  For this reason the use of a power tool can only be authorized when:
t  The power tool maximum speed is 200 rpm.
t  The tightening torque is set to a maximum of 3 Nm.
   
Markings on oil dipstick
1 - max. mark
2 - min. mark
a - Area above hatched field up to max. mark: Do not top-up with engine oil!
b - Oil level within hatched field: can be topped-up with engine oil.
c - Area from min. mark up to hatched field: fill with max. 0.5 ltr. of engine oil!
  N17-0037

Removing and installing oil sump > < Removing and installing parts of the lubrication system