seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing fuel delivery unit > < Removing and installing parts of fuel supply system
Removing
Removing
–  Note safety precautions before starting work → Chapter.
–  First check whether a coded radio is fitted. If this is the case obtain the anti-theft coding.
–  With the ignition switched off disconnect battery earth strap.
–  Fold rear seat forwards.
–  Remove fuel tank flap unit.
   
–  Pull connector -1- and supply and return pipes -2- and -3- off flange.
  Note!
Press buttons on hose couplings to do this.
  Warning
Fuel supply pipes are under pressure! Before removing from hose connection wrap a cloth around the connection. Then release pressure by carefully pulling hose off connection.
  E20-0010
–  Remove union nut with spanner -U-40055 A-.
–  Pull fuel delivery unit and seal out of the opening in fuel tank.
  Note!
If the delivery unit is to be renewed then drain old delivery unit before disposal.
  E20-0003

Removing and installing fuel delivery unit > < Removing and installing parts of fuel supply system