Leon Mk1
| Assembly diagram |
| For vehicles with the safety valve located in the exterior of the activated charcoal filter system; Safety valve: check and fitting position → Chapter. |
| 1 - | Securing ring |
| 2 - | Support |
| q | On body front right. |
| 3 - | Electromagnetic valve 1 -N80- |
| q | Valve closed with ignition switched off |
| q | When the engine is warm the valve will be activated (pulsed) from the engine control unit |
| q | Checking: → Rep. Gr.01 |
| 4 - | Connector |
| 5 - | Connecting piece |
| 6 - | Throttle valve control part -J338- |
| 7 - | Activated charcoal filter system |
| q | Fitting location: in front right wheel housing |
| q | To remove: to unlock, release the securing tab -arrow- and remove the container upwards |
| 8 - | Breather pipe |
| q | From gravity/overload valve on fuel tank → Item |
