seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine lubrication > < Checking compression pressure

Leon Mk1

Removing
Removing
–  First remove toothed belt → Chapter.
–  Turn crankshaft back slightly.
–  Remove camshaft sprockets. Hold camshaft sprocket with counter-hold -T20018A- when loosening and tightening.
–  Lubricate threaded head of oil seal extractor -T20031- (Ø 27 mm), place in position and screw into oil seal as far as possible exerting firm pressure.
   
–  Screw inner part against camshaft until the seal is pulled out.
–  Clamp oil seal extractor in a bench vice and pull seal out using a pair of pliers.
  E15-0115

Engine lubrication > < Checking compression pressure