seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Dismantling and assembling piston and conrod > < Assembly diagram

Leon Mk1

Installing
Installing
–  Lightly oil sealing lip of oil seal.
–  Insert oil seal into guide sleeve -T20081/2- and position on crankshaft journal.
   
–  Press guide sleeve -T20081/2- with oil seal in on to limit stop using press piece -T20081/1-. To do this use an old central bolt for the vibration damper/balancer pulley.
–  Release guide sleeve -T20081/2-.
–  Install ribbed belt pulley again and hold with counter-hold -T20018A-.
–  First Install toothed belt → Chapter.
  E13-0070

Dismantling and assembling piston and conrod > < Assembly diagram