Note | t
| Secure the joints between hoses by using the same clamps as originally fitted. |
| t
| Before repairing or testing, check all pipes and hoses for correct assembly and leaks. |
| t
| The sleeves and hoses for the supercharging system should be free from oil and grease before assembling. |
| –
| Remove air ducting → Item; first disassemble the upper anchorage and then carefully lower until the lower mounting is free. |
| –
| On the upper part of the vehicle, disconnect the Boost pressure sender -G31- → Item switch, and separate the intake hose from the intercooler → Item. |
| –
| On the lower part of the vehicle, remove the union hose from the intercooler → Item, and the three intercooler securing bolts → Item. |
| –
| Remove the intercooler. |
|
|
|
