seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine: fitting > < Detaching engine from gearbox

Leon Mk1

Attaching engine to repair stand
   
Attaching engine to repair stand
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
t  counterhold -VW 540-, see equivalent → Anchor
t  Lifting tackle -3033-, see equivalent → Anchor
t  Engine and gearbox support -VAS 6095-, see equivalent → Anchor
t  Workshop crane -VAS 6100-, see equivalent → Anchor

Requirement
l  The gearbox must be removed from the engine
Operation process
   
–  Hook the support tool -3033- on the engine and on the workshop crane -VAS 6100-, as shown in the figure.
Flywheel side: item 4.
Vibration damper side: item 8.
  N10-10263
–  Fasten the engine by using the securing tool -VW 540- on the engine and gearbox support -VAS 6095-.
  A10-0766

Engine: fitting > < Detaching engine from gearbox