Leon Mk1
Engine codes ASZ, ATD, AXR, BLT |
1 - | Seal |
q | replace |
2 - | Exhaust tube, front |
q | The vibration shock absorbing element in the front exhaust pipe must not be bent more than 10° - otherwise they can be damaged. |
3 - | 25 Nm |
q | 3x |
q | replace |
4 - | Suspension |
q | With securing ring |
q | If this is damaged, replace it |
5 - | Tunnel bridge. |
6 - | 25 Nm |
q | 4x |
7 - | Double clamp for repairs |
q | Installation position of front double clamp → Fig. |
q | Installation position of rear double clamp → Fig. |
8 - | Nut and bolt - 40 Nm |
q | 2x |
9 - | Suspension |
q | With securing ring |
q | If this is damaged, replace it |
10 - | Suspension |
q | With securing ring |
q | If this is damaged, replace it |
11 - | Cutting location |
q | The exhaust tube and the pre-silencer come originally as one piece. In repair cases the front and rear silencer are supplied individually with a double clamp for connecting them |
q | Marked with three traces on the circumference of the exhaust tube |
q | Cutting the exhaust tube in the marked zone → Chapter |
12 - | Pre-silencer and post-silencer |
q | Replace independently for repairs |