Leon Mk1
| Fuel supply unit and fuel level indicator sender: Assembly overview |
| 1 - | Fuel delivery unit |
| q | Checking fuel pump (electrical test) → Chapter |
| q | removing and fitting → Chapter |
| 2 - | Fuel gauge senders -G- |
| q | Checking resistance values → Chapter |
| q | removing and fitting → Chapter |
| 3 - | Injector pipe |
| q | To disengage, press the clip in the joint to unlock it |
| 4 - | Seal |
| q | Replace |
| q | Install dry |
| 5 - | Fuel return line |
| q | From fuel filter. |
| q | Mark before removing |
| q | To disengage, press the clip in the joint to unlock it |
| q | Do not bend |
| q | Note the direction of the arrow (fuel supply or fuel return system) on flange when installing |
| q | Install on fuel tank |
| 6 - | Fuel supply line |
| q | To fuel filter |
| q | Mark before removing |
| q | To disengage, press the clip in the joint to unlock it |
| q | Do not bend |
| q | Note the direction of the arrow (fuel supply or fuel return system) on flange when installing |
| q | Install on fuel tank |
| 7 - | Connector |
| q | For the fuel gauge sender -G- |
| q | For fuel pump -G6- |
| 8 - | Locking ring |
| q | Removing and installing with the rotation tool -T10202- |
| q | Tighten to 145 Nm |
| 9 - | Spray jet: |
