Leon Mk1
| Assembly overview - air filter |
| 1 - | 1.5 Nm |
| 2 - | Air duct |
| q | for cold air exit |
| q | in inner right front wheel well |
| 3 - | Insertable plastic nut |
| 4 - | Spreader clip |
| 5 - | Air filter housing (upper section) |
| q | Clean the bottom part of the air filter housing from salt deposits, dirt and leaves. |
| 6 - | Heat shield |
| 7 - | Air filter element |
| q | Always use a genuine spare part air filter element |
| q | removing and fitting → Chapter |
| q | Note the replacement intervals → Booklet301 |
| 8 - | Air filter housing (lower section) |
| q | Clean any salt deposits or leaves and dirt out of air cleaner housing (bottom section) |
| 9 - | O ring |
| q | If this is damaged, replace it |
| 10 - | Air mass meter -G70- |
| q | removing and fitting → Chapter |
| 11 - | Hose clip |
| 12 - | Air hose |
| q | To turbocharger |
| q | Ensure that there is no dirt or leaves in the air hose. |
| 13 - | Air duct |
| q | To the lock carrier |
| 14 - | Air duct |
| q | Flexible connection line |
| 15 - | Air duct |
| q | To air filter housing |
| q | Clean any leaves and dirt out of air channel |
