SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Dismantling and assembling pistons and conrods >
< Removing and installing sealing flange and flywheel/drive plate
Leon Mk1
Power unit
4-Cylinder injection engine (1.4 l engine with direct injection engine, turbocharger and displacement compressor)
Enginecrankshaft group, pistons
Crankshaft
Pulling needle bearing out of and driving into crankshaft
Pulling needle bearing out of and driving into crankshaft
Only vehicles with a dual clutch gearbox
Special tools and workshop equipment required
t
Puller -T10055-
t
With adapter -T10055/3-
t
Centring mandrel -3176-
t
or drift -VW 207 C-
t
Puller, e.g. Kukko -21/2-
t
Adapter Kukko -22/1-
Removing
–
Pull out using commercially available puller, e.g. Kukko -21/2-, adapter Kukko -22/1-, adapter -T10055/3- and puller -T10055-.
Fitting:
–
Drive in flush with drift -VW 207 C- or centring mandrel -3176-.
Power unit
4-Cylinder injection engine (1.4 l engine with direct injection engine, turbocharger and displacement compressor)
Enginecrankshaft group, pistons
Crankshaft
Dismantling and assembling pistons and conrods >
< Removing and installing sealing flange and flywheel/drive plate