seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Diagram of coolant hose connections > < Cooling system, bodywork side: removing and fitting
Cooling system, engine side: removing and fitting
   
Cooling system, engine side: removing and fitting
1 - Towards the upper part of the expansion tank
q   Diagram of coolant hose connections → Chapter
2 - O-ring
q   Replace if damaged or worn
3 - To heat exchanger
q   Diagram of coolant hose connections → Chapter
4 - Connector
q   2 pins
5 - Coolant temperature sender -G62-
q   For engine control unit
q   Before removing, possibly reduce cooling system pressure
6 - Securing clip
q   Check firm seating
7 - Coolant pipe
q   Diagram of coolant hose connections → Chapter
8 - From ATF radiator (automatic gearbox only) or formed pipe
q   Diagram of coolant hose connections → Chapter
9 - Bolt, 40 Nm
10 - Nut, 10 Nm
11 - Towards the lower part of the expansion tank
q   Diagram of coolant hose connections → Chapter
12 - O-ring
q   Replace if damaged or worn
13 - From ATF radiator (automatic gearbox only) or formed pipe
q   Diagram of coolant hose connections → Chapter
14 - Connection nozzle
q   Diagram of coolant hose connections → Chapter
15 - To radiator, upper part
q   Diagram of coolant hose connections → Chapter
q   Check for secure seating
16 - Comes from the bottom of radiator
q   Diagram of coolant hose connections → Chapter
q   Check for secure seating
17 - Bolt, 15 Nm
18 - Connection nozzle
q   Diagram of coolant hose connections → Chapter
19 - Coolant thermostat
q   Check: heat the thermostat in water
q   Approx. commencement of opening 87 ?
q   End: approx. 102 °C
q   Opening distance: at least 7 mm
q   Removing and installing → Chapter
20 - Notched belt
q   Mark direction of rotation before removing
q   Check for wear
q   Do not kink.
q   removing, installing and tightening → Chapter
21 - Front of coolant pump
q   Check for ease of movement
q   If damaged or leaking: replace completely
q   Removing and installing → Chapter
22 - Rear notched belt guard
23 - Bolt, 20 Nm
24 - Washer

   

Diagram of coolant hose connections > < Cooling system, bodywork side: removing and fitting