SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4-cylinder TDI diesel engine with pump injector unit, 2.0 litre and 2v, mechanics | Engine assy,cylinder block,crankcase

Engine brackets: Check

–	Detach the outer -1- and inner -2- engine covers, by pulling them evenly upwards.

–	Release the fuel and coolant hoses from their fittings on the air duct.

–	Remove bolt -1-.

–	Remove air duct by lifting retaining clips -arrows- slightly.

The following dimensions must be reached:

l	Between the engine support foot and the right longitudinal member there must be a distance of -a- = 13.5 mm.

l	The moulded edge at the engine support foot -2- must be parallel to the support arm -1- (dimension-x- = dimension-x-).

Note

The dimension -a- = 13.5 mm can be checked, for example, with an appropriate cylinder object.

SEAT Workshop Service and Repair Manuals