Leon Mk1
|
| 1 - | Pulley/damper with special bolt 10 Nm + 90° (1/4 turn) |
| q | Removing and fitting → Chapter |
| q | Replace bolts |
| q | Use original bolts only → ETKA (electronic parts catalogue) |
| 2 - | 25 Nm |
| 3 - | Alternator |
| q | Removing and fitting → Electrical system; Rep. Gr.27 |
| q | To facilitate the positioning of the alternator push back slightly, the threaded bushes for securing bolts. |
| 4 - | Bracket for auxiliary units, 45 Nm |
| q | Removing and fitting → Chapter |
| q | For alternator and air conditioner's compressor |
| 5 - | Tensioning device for Poly-V belt: |
| q | To slacken Poly-V belt rotate with spanner. |
| q | Lock tensioner with Retention tool -T10060A-. |
| 6 - | 25 Nm |
| 7 - | Air conditioning compressor |
| q | Removing and installing → Air conditioning; Rep. Gr.87 |
| 8 - | 45 Nm |
| 9 - | Dowel sleeves |
| 10 - | Poly-V belt |
| q | Mark direction of rotation with chalk or felt pen before removing |
| q | Check for wear |
| q | Do not bend the belt |
| q | Removing and fitting → Chapter |
| q | Poly-V belt routing → Fig. |
|
|
|
|
