WARNING | When completing any assembly work, especially in the engine compartment, pay attention to the following due to the cramped conditions: |
| t
| Route all the various lines (e.g. for fuel, hydraulics, active carbon filter system, coolant, refrigerant, brake fluid and vacuum pipes and hoses) and electrical wiring so that the original positions are restored. |
| t
| Ensure sufficient clearance for all moving or hot components. |
|
| If in the test drives it is necessary to use the tester units, take note of the following: |
| l
| Always install the test and measurement equipment in the back seat of the vehicle so that they may be used by a second mechanic |
| l
| If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered. |
|
|
|
