Leon Mk1
Cooling system, engine side: disassembly and assembly |
1 - | O-ring |
q | Replacement |
2 - | 10 Nm |
3 - | From expansion tank |
q | → Item |
4 - | Securing clip |
5 - | Liquid coolant temperature sender -G62- or engine temperature sender -G27- |
q | With liquid coolant temperature sender -G2- |
6 - | To heat exchanger |
7 - | Thermal switch for speed 3 of the electric ventilator -F165- |
q | Switching temperature: 110 … 115 °C and disconnection: 105 … 110 °C |
8 - | From heat exchanger |
9 - | From expansion tank |
q | → Item |
10 - | Support |
11 - | Liquid coolant rigid tube |
12 - | Oil cooler |
13 - | From internal flexible tube of radiator |
q | → Item |
14 - | 20 Nm + 1/4 turn (90°) |
15 - | Support |
q | For Poly-V belt without tensioning pulley |
16 - | 30 Nm |
17 - | Poly-V belt |
q | Removing and fitting → Chapter |
18 - | Coolant pump |
q | Verify correct operation |
q | Removing and fitting → Chapter |
19 - | To the upper flexible tubing of the radiator |
q | → Item |