Fuel supply system components: removing and installing |
Note! t
| The hose connections are held with strip or tightening clamps. |
t
| Always replace the tightening clamps with strip clamps. |
t
| To fix the fuel hoses to the engine, use only strip clamps; do not use tightening or screw clamps. |
t
| To install the strip clamps, pliers -T20029- are recommended. |
Remove and install the fuel tank with accessory parts and fuel filte → Chapter. |
Accelerator control components: repairing → Chapter. |
Repair the activated charcoal filter system components → Chapter. |
|
|
|