| To avoid personal injury and/or damage to the ignition/injection system, bear in mind the following: |
| t
| Do not touch or disconnect the ignition wiring with the engine running or ignition on. |
| t
| Disconnect and connect the ignition/injection system wiring, including measurement apparatus wiring, only when the ignition is off. |
| t
| To turn over the engine with the ignition on, without starting it up, e.g.: to test the compression, remove the connector from the ignition transformer. |
| If the use of testing and measuring instruments is necessary during a road test, the following must be borne in mind: |
| t
| The testing and measuring instruments must always be installed in the back seat, so that they can be used from this seat by a second mechanic. |
| Operating test and measurement apparatuses from the front passenger seat may result in personal injury from airbag in the event of an accident. |
| t
| To turn over the engine with the ignition on, without starting it up: |
| –
| Remove the air filter → Fig.. |
|
|
|
