seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Mixture preparation system, electronic inj.,Gas > < Active carbon filter system

Leon Mk1

Fuel level sender: removing and installing
Fuel level sender: removing and installing
Removing
–  Remove fuel delivery unit → Chapter.
   
–  Release pipe connector lugs -3- and -4- and pull off.
–  Lift retaining tabs -1- and -2- with a screwdriver and disconnect fuel gauge sender downwards -arrow-.
Fitting
Installation is carried out in the reverse order to removal, observing the following:
–  Insert fuel level sender in the guides on the fuel delivery unit and push up until it engages.
–  Install fuel delivery unit → Chapter.
  A20-0103

Mixture preparation system, electronic inj.,Gas > < Active carbon filter system