SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4 cylinder 2.0 litre 4V Common rail TDI engine (2nd generation) | Exhaust turbocharger, G-charger

Removing and installing charge air pressure senderG31

Removing and installing charge air pressure sender -G31-

t	Removing → Anchor.

t	Installing → Anchor.

Removing

–	Unplug electrical connector -2- at charge air pressure sender -G31-.

–	Unscrew bolts and pull charge air pressure sensor -G31- from charge air cooler.

Note

Ignore -item 1-.

Installing

Reassembly is carried out in the reverse order; note the following:

Note

Fit new O-ring.

l	Tightening torque → Chapter „Charge air system with one charge air cooler: Assembly overview“

SEAT Workshop Service and Repair Manuals