Leon Mk1
| Lambda probes: Assembly overview |
| 1 - | Particle filter |
| q | Removing and installing the particulate filter in vehicles with manual gearbox → Chapter |
| q | Adaption must be performed after renewing particulate filter. Use → Vehicle diagnostic tester |
| 2 - | Exhaust gas temperature sender 1 -G235-, 45 Nm |
| q | Removing and installing → Chapter. |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
| 3 - | Turbocharger |
| q | Removing and installing → Chapter. |
| 4 - | Lambda probe -G39- with lambda probe heater -Z19-, 55 Nm |
| q | Removing and installing → Chapter. |
| 5 - | Differential pressure sender -G505- |
| q | Removing and installing → Chapter. |
| q | Pressure pipe to particulate filter, 45 Nm |
| q | With bolt, tightening torque 4.5 Nm |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
| 6 - | Exhaust gas temperature sender 3 -G495-, 45 Nm |
| q | Removing and installing → Chapter. |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
| 7 - | Exhaust gas temperature sender 4 -G648-, 45 Nm |
| q | Removing and installing → Chapter. |
| q | Apply hot bolt paste to the thread → Spare parts catalogue. |
