SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4 cylinder Direct injection engine, turbocharger | Engine assy,cylinder block,crankcase

Engine from manual gearbox: separating and assembling

Special tools and workshop equipment required

t	Additional hook -10 - 222 A /2-, see equivalent → Anchor

t	Workshop crane -VAS 6100-, see equivalent → Anchor

t	Lifting tackle -T40013 -, see equivalent → Anchor

Engine from manual gearbox: separate → Anchor

Engine from manual gearbox: Assembling → Anchor

Removing

Proceed as follows:

l	The engine assembly is removed and fixed to the engine and gearbox support -VW 540- → Chapter.

–	Attach lifting tackle -T40013- to gearbox and close lock.

–	Attach workshop crane -VAS 6100- with hooks -10 - 222 A /2- to lifting tackle.

–	Unscrew bolts -2- and -3- and remove starter.

–	Remove bolts -1, 4, 5- securing gearbox to engine.

Note

Item -A- can be disregarded.

–	Pull gearbox off engine.

Installing

Fastening, manual gearbox to engine

Reassembly is carried out in the reverse order; note the following:

Item

Bolt

M12x65

2 ¹⁾

M12x135

3 ¹⁾

M12x150

M12x80

M10x50

Dowel sleeves to centre

l	¹⁾ Also starter to gearbox

SEAT Workshop Service and Repair Manuals