Leon Mk1
Silencers with suspension elements - Components overview |
1 - | 25 Nm |
2 - | Mounting |
q | Be sure to fit in correct position |
q | If this is damaged, replace it |
3 - | Mounting |
q | Be sure to fit in correct position |
q | If this is damaged, replace it |
4 - | Cutting location |
q | Marked by impressions on connecting pipe |
q | In series production vehicle front and rear silencers come fitted as one unit. In event of repairs, the front and rear silencers are available separately with a double clamp for connection. |
q | Cut the connecting pipe at the cutting point, e.g. using a body saw -VAG 1523B- at right angles → Fig. |
5 - | Rear section of exhaust system |
q | Fit without tension |