seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Sealing flanges and flywheel > < Engine: dismantling and assembly

Leon Mk1

Needle bearings on the crankshaft: remove and install
Needle bearings on the crankshaft: remove and install
Removing → Anchor.
Installing → Anchor.
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Puller -T10055-, see equivalent → Anchor with adaptor -T10055/3-, see equivalent → Anchor
  W00-0988
t  Centring chuck -3176- or awl -VW 207 C-, see equivalent → Anchor
t  Extractor, e.g. Kukko -21/2-
removing
  W00-0085
–  Remove with a conventional extractor, e.g. Kukko -21/2--arrow-, adaptor -T10055/3- and the extractor -T10055-.
Fitting
  Note
If the needle bearing is fitted, its marked side must be visible.
  N13-10062
–  Insert with the awl -VW 207 C- or the centring chuck -3176-.
  V13-0446
Assembly depth -a- = 2 mm.
  V13-0428

Sealing flanges and flywheel > < Engine: dismantling and assembly