SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4 cylinder Gasoline direct injection engine, 2.0 litre turbo 4V, mechanics | Engine assy,cylinder block,crankcase

Attaching engine to repair stand

Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.

Special tools and workshop equipment required

t	counterhold -2024A-, see equivalent → Anchor

t	Engine and gearbox support -VAS 6095-, see equivalent → Anchor

t	Workshop crane -VAS 6100-, see equivalent → Anchor

For assembly work, the engine must be secured to the Engine support -VAS 6095-.

–	Unbolt gearbox.

–	Hook in suspension device -2024A- as follows and remove engine with workshop crane -SAT 1040- from engine/gearbox jack -VAS 6100-.

Pulley side: 2. Borehole of the perforated flange in position 1.

Flywheel end: 1. Hole of the perforated flange in position 7.

Caution

Insert safety pins into the hooks and bolts to prevent damage to the engine and vehicle.

t	The positions numbered 1 – 4 of the hoisting bar face the pulley.

t	The holes in the perforated flanges are counted starting from the hook.

–	Secure the engine to the engine and gearbox support -VAS 6095-.

SEAT Workshop Service and Repair Manuals