seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Pistons and conrods > < Cylinder block (pulley end)

Leon Mk1

Needle bearing: extracting and inserting into crankshaft
Needle bearing: extracting and inserting into crankshaft
t  Removing → Anchor
t  Installing → Anchor
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Extractor -T10055-, see equivalent → Anchor
  W00-10115
t  Pressure tool -3176-, see equivalent → Anchor
t  Kukko -21/2-, see equivalent → Anchor
  W00-0085
Removing
–  Loosen with conventional puller, e.g. Kukko -21/2-, adapter -T10055/3- and puller -T10055-.
Installing
  Note
If the needle bearing is fitted, its marked side must be visible.
  E13-10048
–  Insert with a centring mandrel -3176-.
  V13-0446
Assembly depth -a- = 2 mm.
  V13-0428

Pistons and conrods > < Cylinder block (pulley end)