seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing oil pressure switch for reduced oil pressureF378 > < Removing and installing engine oil cooler

Leon Mk1

Removing and installing oil pressure switchF22
Removing and installing oil pressure switch -F22-
Removal:
   
–  Remove the purging line -1-, disengage the activated carbon vessel -A- and remove upwards -B-. Move the activated carbon vessel to one side.
  Note
Place a cloth underneath bracket for ancillaries to catch any escaping oil.
  N13-10335
–  Disconnect electrical connector -4- on oil pressure switch -F22-.
–  Remove oil pressure switch -F22--3-.
Installation
l  Tightening torque → Chapter
Reassembly is carried out in the reverse order; note the following:
  Note
t  Renew seal.
t  Fit the new oil pressure switch -F22- into the connection immediately to avoid the loss of oil.
–  Check oil level → Fig..
  A17-10458

Removing and installing oil pressure switch for reduced oil pressureF378 > < Removing and installing engine oil cooler