Engine: assembly and dismantling |
Note t
| Finding metal shavings or a large quantity of small metal particles during engine repair could indicate that the conrod bearings are damaged. To prevent this from causing further damage, perform the following repairs: |
t
| Thoroughly clean oil channels. |
t
| Replace the oil radiator. |
t
| Replace the oil filter. |
Poly-V belt: removing and installing → Chapter. |
Removing and installing tensioning device for poly V-belt → Chapter |
Removing and installing bracket for ancillaries → Chapter |
Vibration damper: Removing and installing → Chapter. |
|
|
|