–
| Remove the attachment clip -3-, remove the connection nozzle -2- from the nozzle of the thermostat -4- and remove the flexible tube -1-, or remove the thermostat nozzle -4-. |
Note Observe disposal regulations! |
If the system is filled using the additive G 11 -green colour-: |
–
| Before refilling with new liquid coolant G 12 -purple colour-, the cooling system must be cleaned in the following manner: |
–
| Remove all traces of the old liquid from the system. To achieve this, compressed air may be applied to the coolant expansion tank. |
–
| Close the system and fill only with water. |
–
| Run the engine for about two minutes. |
–
| Empty the liquid and then clean the system again using compressed air. |
Note Observe disposal regulations! |
|
|
|